Do you still need more feedback?
I can set it up if needed, but I need to know if my testing would be any value?
TF1260 Beta Firmware
Moderators: terriblefire, Terriblefire Moderator
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: TF1260 Beta Firmware
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
- GadgetUK164
- Posts: 430
- Joined: Fri Jan 04, 2019 2:26 pm
Re: TF1260 Beta Firmware
Seems to be working! EIDE is at 5.2MB/s performance seems excellent (not sure if I've tested this same firmware?) - Still cannot get beyond 62.5Mhz, but I assume that's related to the chip speed stuff and the clocking change you talked about?
Fantastic pushing this update out =D
Fantastic pushing this update out =D
My YouTube Channel - www.youtube.com/GadgetUK164
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 Beta Firmware
I think all testing is valuable… this doesn’t have the blinks lights extras though.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
- Posts: 2
- Joined: Wed Sep 08, 2021 5:18 pm
Re: TF1260 Beta Firmware
Thanks for beta FW . Is it technically possible that in the future the FW can be upgraded from a CF card on IDE TF1260?
- GadgetUK164
- Posts: 430
- Joined: Fri Jan 04, 2019 2:26 pm
Re: TF1260 Beta Firmware
Are you sure you are using the EIDE port there (the IDE connector on the TF1260) - and testing a drive on that interface, rather than mobo IDE? You should get around 2.6MB with onboard, but much faster (eg. > 4MB) on the EIDE interface. What do you mean by "sluggish" - I see no problems like that here?freemilk wrote: ↑Wed Sep 08, 2021 2:16 am FLASHED. !!
seems stable, might say kind of sluggish, dont take that the wrong way, i am just trying to help with some feedback.
ehide speed is showing me an impressice 2.654.... 2.7xxx .
when i say sluggish i mean like it stalls for a sec then catches up, repeat. hopw this helps.
nice to see an update, Thanks
My YouTube Channel - www.youtube.com/GadgetUK164
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 Beta Firmware
Run bustest.freemilk wrote: ↑Wed Sep 08, 2021 2:16 am FLASHED. !!
seems stable, might say kind of sluggish, dont take that the wrong way, i am just trying to help with some feedback.
ehide speed is showing me an impressice 2.654.... 2.7xxx .
when i say sluggish i mean like it stalls for a sec then catches up, repeat. hopw this helps.
nice to see an update, Thanks
https://aminet.net/util/moni/bustest.lha
I do not understand "stalls for a sec then catches up".
EDIT: e.g. I need something more specific. I see no lag on 2-3 setups i have here with this and I've no idea what software you're using.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF1260 Beta Firmware
I`ve run Quake on loop for hours with new firmware no problem, where`s this lag he`s talking about ?
Re: TF1260 Beta Firmware
i have an Altera USB blaster .... are there any destructions anywhere, that will learn me how to flash the card?
thanks muchly
thanks muchly
"I've seen things you people wouldn't ken, I've seen motors on fire, on the shoulder near Kinryan, I have watched vejazels glitter in the dark, at the black Trongate, awe these moments, will be lost in time, like beers ... when I'm hame. Time to fry"
Re: TF1260 Beta Firmware
No you can't do it with a Blaster...A raspberry pi can if you have one
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF1260 Beta Firmware
Yeah i have about 15 different JTAG cables because none of them are compatible.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."