exxos PSU 230V wiring

Repairs & upgrades.
Post Reply
User avatar
exxos
Site Admin
Site Admin
Posts: 6857
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

exxos PSU 230V wiring

Post by exxos » Mon Dec 31, 2018 2:33 pm

I get asked this info a lot, it is actually on my site but I will post here as well..
http://www.exxoshost.co.uk/atari/last/p ... htm#PSUFIT



230V WIRING - ORIGINAL GREY SWITCH

When ordering the 230V PSU, I already configure the primary for 230V which leaves you with the normal blue & brown mains wires. The secondaries are wired in series and the "link" is the "bullet crimp" which I do when people buy the 230V version.

To wire the transformer to the original Atari switch, so as shown below...

oldswitch.jpg
oldswitch.jpg (30.37 KiB) Viewed 225 times



230V WIRING - BLACK SWITCH

newsw1.jpg
newsw1.jpg (89.99 KiB) Viewed 225 times
newsw2.jpg
newsw2.jpg (36.64 KiB) Viewed 225 times

NOTE: I strongly suggest fitting a new PSU switch when the PSU is fitted.



SWITCH
https://www.exxoshost.co.uk/atari/last/storenew/#0032

ST PSU 230V
https://www.exxoshost.co.uk/atari/last/storenew/#0029

030 PSU 230V
https://www.exxoshost.co.uk/atari/last/storenew/#0094

HOMEPAGE
http://www.exxoshost.co.uk/atari/last/p ... htm#PSUFIT
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply