ST-IDE-ROM Dev Board v1 - BETA Testers

Related information and WIP etc
User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1212
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Thu Mar 26, 2020 11:46 pm

rubber_jonnie wrote:
Thu Mar 26, 2020 10:33 pm
@PaulJ Cheers. Any luck with yours yet?
Worked out of the box rubber_jonnie, tried eprom first then the eprom emulator. Especially sweet since the eprom emulator sits in what should have been the CPU socket. :)
viewtopic.php?f=18&t=2532&start=30#p35461

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2039
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Fri Mar 27, 2020 9:04 am

PaulJ wrote:
Thu Mar 26, 2020 11:46 pm
rubber_jonnie wrote:
Thu Mar 26, 2020 10:33 pm
@PaulJ Cheers. Any luck with yours yet?
Worked out of the box rubber_jonnie, tried eprom first then the eprom emulator. Especially sweet since the eprom emulator sits in what should have been the CPU socket. :)
viewtopic.php?f=18&t=2532&start=30#p35461
@PaulJ I remember now, there's been so much stuff lately, I've been losing track, especially with not sleeping well. Think I will definitely have to get me one of those eprom emulators.
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1212
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Fri Mar 27, 2020 1:36 pm

rubber_jonnie wrote:
Fri Mar 27, 2020 9:04 am
PaulJ wrote:
Thu Mar 26, 2020 11:46 pm


Worked out of the box rubber_jonnie, tried eprom first then the eprom emulator. Especially sweet since the eprom emulator sits in what should have been the CPU socket. :)
viewtopic.php?f=18&t=2532&start=30#p35461
@PaulJ I remember now, there's been so much stuff lately, I've been losing track, especially with not sleeping well. Think I will definitely have to get me one of those eprom emulators.
I have four rj, going to put one on my 8 bit SWTPC S+.

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2039
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Fri Mar 27, 2020 1:52 pm

PaulJ wrote:
Fri Mar 27, 2020 1:36 pm

I have four rj, going to put one on my 8 bit SWTPC S+.
@PaulJ Just got a PM from CM, going to buy one and see how I get on :)
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1212
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Fri Mar 27, 2020 2:12 pm

rubber_jonnie wrote:
Fri Mar 27, 2020 1:52 pm
PaulJ wrote:
Fri Mar 27, 2020 1:36 pm

I have four rj, going to put one on my 8 bit SWTPC S+.
@PaulJ Just got a PM from CM, going to buy one and see how I get on :)
@rubber_jonnie , you will have to build an adaptor for either the mega or H4. Also I'll give you the set up. Its not hard just very little documentation.

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2039
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Fri Mar 27, 2020 2:16 pm

PaulJ wrote:
Fri Mar 27, 2020 2:12 pm

@rubber_jonnie , you will have to build an adaptor for either the mega or H4. Also I'll give you the set up. Its not hard just very little documentation.
@PaulJ Cool, thank you.
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2039
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Wed Apr 01, 2020 6:53 pm

rubber_jonnie wrote:
Fri Mar 27, 2020 2:16 pm
PaulJ wrote:
Fri Mar 27, 2020 2:12 pm

@rubber_jonnie , you will have to build an adaptor for either the mega or H4. Also I'll give you the set up. Its not hard just very little documentation.
@PaulJ Cool, thank you.
Hey @PaulJ I'd be grateful if you could share the details of the eprom emulator adaptor build please :)

FYI my 2nd V1.1C IDE adaptor is now up and running :) Also, so is my 2nd Megabus IDE Adapter with the addition of the missing GAL.

:girldance: :girldance: :girldance:
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1212
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Wed Apr 01, 2020 7:24 pm

rubber_jonnie wrote:
Wed Apr 01, 2020 6:53 pm
rubber_jonnie wrote:
Fri Mar 27, 2020 2:16 pm


@PaulJ Cool, thank you.
Hey @PaulJ I'd be grateful if you could share the details of the eprom emulator adaptor build please :)
Which one do you want first Jon, I'll do a schematic with eagle but I have to make 27c400 layout since I can't find one. Would you prefer the H4 or mega first. Once I get one the other will be easy. The reason I say eagle schematic is I want to do adapters and this way doing a schematic in eagle will work toward that end.

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 2039
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by rubber_jonnie » Wed Apr 01, 2020 7:36 pm

@PaulJ Hmm, you've put me on the spot there! Since I have TOS 2.06 via the IDE interface for the H4, let's go for the Mega first please. I'd like to get my Mega 1 going with TOS 2.06 and see how the Megabus IDE interface gets on with it.
Collector of old Atari things:
800XL + Ultimate 1MB, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k +APE Warp) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg), 1040STF long button floppy, 2x 1040 STFMs + Gotek, 2x 4160STE with 32Mhz booster, ROM switcher, Mega ST1, Mega ST4, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
PaulJ
Trusted Guru
Trusted Guru
Posts: 1212
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: ST-IDE-ROM Dev Board v1 - BETA Testers

Post by PaulJ » Wed Apr 01, 2020 8:06 pm

rubber_jonnie wrote:
Wed Apr 01, 2020 7:36 pm
@PaulJ Hmm, you've put me on the spot there! Since I have TOS 2.06 via the IDE interface for the H4, let's go for the Mega first please. I'd like to get my Mega 1 going with TOS 2.06 and see how the Megabus IDE interface gets on with it.
Ok Jon, I'll do the mega first and then the H4. I'll see if I can get the eagle 27c400 package from @cmorley. I know he's got one because he gave me a eagle schematic to use the emulator on an eight bit machine. So cmorley is there any chance I could get the eagle 27c400 package or a place I can find it? Thanks..

Post Reply

Return to “MONGREL EDITION DEVELOPMENT & INFO”