RTC program to display time on menubar ?

News,announcements,programming,fixes,game patches & discussions.

Moderator: troed

Post Reply
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

RTC program to display time on menubar ?

Post by exxos »

I could have sworn the forget me clock had a program to display the clock at the top right hand side of the screen, but I cannot find my original floppy or even remember if it was part of a software package or not. Anyone remember or know about any such program ?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: RTC program to display time on menubar ?

Post by rubber_jonnie »

I have it somewhere, I will see if I can find it.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
davemacblack
Posts: 13
Joined: Fri Sep 15, 2017 11:53 am

Re: RTC program to display time on menubar ?

Post by davemacblack »

User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: RTC program to display time on menubar ?

Post by rubber_jonnie »

There is also DC Clock, file is attached.

The disk is in a funky format, so you have to run this program:
gotob.JPG
gotob.JPG (3.77 KiB) Viewed 4961 times
And once the A: drive window reappears, press 'esc' to refresh the window. Once refreshed, you'll see side B of the disk, and the DC Clock folder.

Not sure how good it is, will have to test on one of my real machines.
Attachments
stf02.zip
(414.5 KiB) Downloaded 195 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: RTC program to display time on menubar ?

Post by rubber_jonnie »

Right, finally found the one I was using!!

It's called Areal37.acc, just drop in the root of your boot drive and voila. There are instructions for use, plus other Areal37 software, however that software won't work with FGMCII or clones, you'll need the proper FGMC software for that.
Clock.JPG
Clock.JPG (67.89 KiB) Viewed 4956 times
Attachments
areal37.zip
(23.02 KiB) Downloaded 186 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: RTC program to display time on menubar ?

Post by exxos »

rubber_jonnie wrote: Sun Apr 14, 2019 11:10 am Right, finally found the one I was using!!

It's called Areal37.acc, just drop in the root of your boot drive and voila. There are instructions for use, plus other Areal37 software, however that software won't work with FGMCII or clones, you'll need the proper FGMC software for that.
ahh that looks and sounds familiar!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: RTC program to display time on menubar ?

Post by rubber_jonnie »

exxos wrote: Sun Apr 14, 2019 11:17 am
ahh that looks and sounds familiar!
After all the work on the RTC, it would seem fairly silly if I didn't have it lying around somewhere!

Here is a boot floppy image ready to go with the Areal37.acc in place. Just remove the .txt from the end to make it ready.

This also has all you need for setting the FGMCII, activating it at boot and Y2K fixes.

My guide here: http://www.exxosforum.co.uk/atari/last/R ... lation.pdf has all the information you need to set the clock, plus some info on TOS 2.06 gotchas.
Attachments
fgmc.ST.txt
(720 KiB) Downloaded 200 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: RTC program to display time on menubar ?

Post by exxos »

rubber_jonnie wrote: Sun Apr 14, 2019 11:28 am After all the work on the RTC, it would seem fairly silly if I didn't have it lying around somewhere!

Here is a boot floppy image ready to go with the Areal37.acc in place. Just remove the .txt from the end to make it ready.
Can you dump it on this tread, then will be able to find it again ;)
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: RTC program to display time on menubar ?

Post by rubber_jonnie »

It is in the disk image I just uploaded, but here is just the file on it's own, once again, remove.txt from the end to make it usable.
Attachments
AREAL37.ACC.txt
(11.44 KiB) Downloaded 204 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Post Reply

Return to “SOFTWARE PROGRAMMING & DISCUSSION”