Falcon repair - Phantom SE - need input.

Bikerbob · Post by **Bikerbob** » Tue Dec 31, 2019 4:20 am

Hey all, I have already had this going on Atari-forum.. so I dont want to duplicate everything.

I am trying to fix my buddy's Falcon - it had a Phantom SE Accelerator installed - I think I might have a bad crystal?

http://atari-forum.com/viewtopic.php?f= ... 25#p389930

Thats the topic.. if you are into Falcons, and feel you might have input. I could really use it.

Thanks

James

Bikerbob · Post by **Bikerbob** » Wed Jan 01, 2020 5:52 pm

Really could use some help.

Would appreciate any input.

James

Post by **exxos** » Wed Jan 01, 2020 6:08 pm

I think as other have said in that thread, best to remove it and get a stock machine working first.

Bikerbob · Post by **Bikerbob** » Fri Jan 03, 2020 10:43 pm

So I will need to source the SMD resistors removed and L102.

Repair the cut traces.. and a couple of the chips.. I am not sure pins are going back in.. so might have to replace the chips.

I guess I will start sourcing..

James

Bikerbob · Post by **Bikerbob** » Mon Jan 06, 2020 7:26 pm

Anyone tell me the values of what I have lost?

I dont see a value for L102 on the schematic? R234 etc?

James

Post by **exxos** » Mon Jan 06, 2020 7:33 pm

If your talking about the clock resistors which are normally removed, those are probably 33R. Inductors, no idea, Probably salvage them from a STFM, or just wire link over them for testing as they probably don't really do much.

Bikerbob · Post by **Bikerbob** » Mon Jan 06, 2020 8:10 pm

ok .. I just want to get this thing going!

Thanks

James

Falcon repair - Phantom SE - need input.

Falcon repair - Phantom SE - need input.

Re: Falcon repair - Phantom SE - need input.

Re: Falcon repair - Phantom SE - need input.

Re: Falcon repair - Phantom SE - need input.

Re: Falcon repair - Phantom SE - need input.

Re: Falcon repair - Phantom SE - need input.

Re: Falcon repair - Phantom SE - need input.