Tf534 problem with IDE speed

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

kulamario
Posts: 13
Joined: Fri Nov 29, 2019 7:20 pm

Tf534 problem with IDE speed

Post by kulamario » Sun Feb 09, 2020 7:43 pm

Welcome
I just finish my TF534 everything working fine except Card SD/CF
System see partitions and start from card but speed is to slow sysinfo show me only 40kb/s
Anybody can help me please
System what I use is classic wb with kickstart 3.1

dalek
Posts: 81
Joined: Thu Nov 08, 2018 11:03 am

Re: Tf534 problem with IDE speed

Post by dalek » Sun Feb 09, 2020 7:55 pm

Known issue for a lot of people - try an SD2IDE adapter and SD Card on a short cable. If you need a long cable, use a short IDE cable an an SD extension cable.

Like these:
https://www.ebay.com.au/itm/44-Pin-Male ... SwEhVdbLih
and
https://www.ebay.com.au/itm/SD-to-SD-Ca ... -xVTtuaDzA

EDIT: and make sure to use 'mufastrom' command in your startup sequence from the mmulib package http://aminet.net/package/util/libs/MMULib.lha

kulamario
Posts: 13
Joined: Fri Nov 29, 2019 7:20 pm

Re: Tf534 problem with IDE speed

Post by kulamario » Sun Feb 09, 2020 8:13 pm

I use only SD2IDE connect very short ribbon cable 44pin to tf534
Card is in SD2IDE
No use extension

terriblefire
Moderator Team
Moderator Team
Posts: 1833
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Tf534 problem with IDE speed

Post by terriblefire » Sun Feb 09, 2020 9:00 pm

If this is happening then there is an issue with interrupts. Basically the TF536 injects interrupts for the IDE interface but if they arent getting through for whatever reason then you will see tape speeds.

What Amiga are you trying this on? If things are this bad then you probably have some kind of soldering issue.
———
I get cranky when asked to repeat myself.

kulamario
Posts: 13
Joined: Fri Nov 29, 2019 7:20 pm

Re: Tf534 problem with IDE speed

Post by kulamario » Sun Feb 09, 2020 9:16 pm

I have A500 rev6A
Now I connect straight to tf534 still no changes

terriblefire
Moderator Team
Moderator Team
Posts: 1833
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Tf534 problem with IDE speed

Post by terriblefire » Sun Feb 09, 2020 9:21 pm

Ah sorry i thought this was 536.. is the INT2 lead wired up?
———
I get cranky when asked to repeat myself.

kulamario
Posts: 13
Joined: Fri Nov 29, 2019 7:20 pm

Re: Tf534 problem with IDE speed

Post by kulamario » Sun Feb 09, 2020 9:32 pm

no i no connect this
where is should be connect?

terriblefire
Moderator Team
Moderator Team
Posts: 1833
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Tf534 problem with IDE speed

Post by terriblefire » Sun Feb 09, 2020 10:35 pm

———
I get cranky when asked to repeat myself.

kulamario
Posts: 13
Joined: Fri Nov 29, 2019 7:20 pm

Re: Tf534 problem with IDE speed

Post by kulamario » Sun Feb 09, 2020 10:55 pm

thx very much now i have 1.9mb/s

kulamario
Posts: 13
Joined: Fri Nov 29, 2019 7:20 pm

Re: Tf534 problem with IDE speed

Post by kulamario » Tue Feb 18, 2020 1:45 am

yes i have fast drive but after connect this INT0 keyboard stop working
in Amiga Test Kit no even one button work
in WB Classic on WDHLoad i cant finish demo or game only reset working
can anybody give me some advice please

Post Reply

Return to “TF534 (OBSOLETE)”