TF CD32 Riser Revision 2 Design Complete

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Post Reply
terriblefire
Moderator Team
Moderator Team
Posts: 1985
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

TF CD32 Riser Revision 2 Design Complete

Post by terriblefire » Sun Mar 22, 2020 9:33 pm

The new CD32 Riser is design complete and I've placed an order for 5 with almost full assembly.

The remaining assembly is 7 caps, 1 CPLD and the sockets (USB, DB23 & MCA). Everything else is on the board already.

The order was £120 for 5 so if you are interested in beta testing they will be £25 each (assuming they work) in the form they arrive from china. One is reserved for @arkadiusz.makarenko and one for myself.
Capture.JPG
Capture.JPG (55.91 KiB) Viewed 273 times
Feeling a bit broke now.. Three in flight orders with JLC.
———
I get cranky when asked to repeat myself.

go0se
Posts: 159
Joined: Sun Nov 25, 2018 7:55 pm

Re: TF CD32 Riser Revision 2 Design Complete

Post by go0se » Sun Mar 22, 2020 11:43 pm

Put me down for one @ £25, I might even have the parts to finish building it this time! :)

terriblefire
Moderator Team
Moderator Team
Posts: 1985
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF CD32 Riser Revision 2 Design Complete

Post by terriblefire » Sun Mar 22, 2020 11:47 pm

go0se wrote:
Sun Mar 22, 2020 11:43 pm
Put me down for one @ £25, I might even have the parts to finish building it this time! :)
TBH i'll probably put a XC9572XL for everyone so long as i can find the chips in the lab. Just needs the DB25, 2 x MCAs and the USB header. Oh and the battery holder has changed to a smaller type.
———
I get cranky when asked to repeat myself.

terriblefire
Moderator Team
Moderator Team
Posts: 1985
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF CD32 Riser Revision 2 Design Complete

Post by terriblefire » Sun Mar 22, 2020 11:48 pm

go0se wrote:
Sun Mar 22, 2020 11:43 pm
Put me down for one @ £25, I might even have the parts to finish building it this time! :)
TBH i'll probably put a XC9572XL for everyone so long as i can find the chips in the lab. Just needs the DB25, 2 x MCAs and the USB header. Oh and the batter holder has changed to a smaller type.
———
I get cranky when asked to repeat myself.

theq
Posts: 63
Joined: Tue Dec 18, 2018 7:16 pm

Re: TF CD32 Riser Revision 2 Design Complete

Post by theq » Mon Mar 23, 2020 12:46 am

I wouldn’t mind one, if nobody else feels the calling.

User avatar
supaduper
Posts: 236
Joined: Thu Nov 08, 2018 12:05 pm

Re: TF CD32 Riser Revision 2 Design Complete

Post by supaduper » Mon Mar 23, 2020 8:22 am

I`ll take one if there is one available bud, just email me if you want me to wang over some wonga :)

terriblefire
Moderator Team
Moderator Team
Posts: 1985
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: TF CD32 Riser Revision 2 Design Complete

Post by terriblefire » Mon Mar 23, 2020 8:37 am

supaduper wrote:
Mon Mar 23, 2020 8:22 am
I`ll take one if there is one available bud, just email me if you want me to wang over some wonga :)
Ha! Ok. Not needing it right now. But i'm at my limit in terms of pushing new things to the boardhouse for a while
———
I get cranky when asked to repeat myself.

juz400
Posts: 15
Joined: Wed Sep 11, 2019 8:18 pm

Re: TF CD32 Riser Revision 2 Design Complete

Post by juz400 » Mon Mar 23, 2020 7:01 pm

Looks like I got here to late for number 5 but if there is a spare!
I found a DB23 connector in my box of bits, would be lovely to give it a home.
Got a HP USB wireless Keyb/Mouse set from work, is there anything I can do vis the USB end, info I can retreive from it that may be usefull?
Justin.

Post Reply

Return to “TF330”