Project: HDMI/DVI out for STFM

Progress on our FPGA cores.
User avatar
sandord
Trusted Guru
Trusted Guru
Posts: 609
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: Project: HDMI/DVI out for STFM

Post by sandord » Wed Jul 01, 2020 6:41 am

I guess a compromise to consider would be cutting off 10 lines at the top and 10 at the bottom, distributing the lost area evenly. Realistically, most CRTs didn't show 100% of the full screen picture anyway. I'm pretty sure that scaling will yield unacceptable results.

Perhaps a mode switch could have the user switch between several clipping modes.

User avatar
Icky
Moderator
Moderator
Posts: 2198
Joined: Sun Sep 03, 2017 10:57 am
Location: UK
YouTube: https://tinyurl.com/yals4a3k
Contact:

Re: Project: HDMI/DVI out for STFM

Post by Icky » Wed Jul 01, 2020 11:29 am

sandord wrote:
Wed Jul 01, 2020 6:41 am
Perhaps a mode switch could have the user switch between several clipping modes.
@sandord - definitely possible as we already have jumpers to allow different settings. These can be seen further back in the thread in the jumper setting photo.

Post Reply

Return to “FPGA DEVELOPMENT”