V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Help & information about the V2.X series boosters.
User avatar
exxos
Site Admin
Site Admin
Posts: 6822
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Post by exxos » Fri Jun 14, 2019 10:00 pm

Progress :)

Oddly the original SEC worked fine with the blitter.. and yet this new SEC version is basically the same, only didn't play nice with the blitter.

So I added a CLK8 delay to BR, and then it loaded GB6 but did this...

IMG_4335.JPG
IMG_4335.JPG (66.83 KiB) Viewed 30 times

But it was actually repeatable that GB6 did load each time, but it was the graphics side which was going wonky...

So then I added another CLK8 delay to ST_BG... and...

IMG_4337.JPG
IMG_4337.JPG (110 KiB) Viewed 30 times

I dare not turn it off in case it does not turn back on again :lol:


Current setup..

IMG_4336.JPG
IMG_4336.JPG (150.48 KiB) Viewed 30 times

So oddly the bus grant needed some delays, when in all my testing on the previous booster did not need this.. Bizarre... I need to look into this some more...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply